Unirac Launches New Utility/Commercial Ground Mount Solution
ALBUQUERQUE, NEW MEXICO, July 13, 2009 – Unirac Inc., North America’s leading manufacturer of solar photovoltaic (PV) mounting solutions, today announced the launch of the ISYS Ground Mount, the first modular mounting solution utilizing innovative installation techniques and offering better value for the large scale utility and commercial PV market. Unirac is showcasing the ISYS Ground Mount at Intersolar North America, in San Francisco, CA, from July 14 to 16, 2009.
Designed to deliver the most cost effective mounting system, ISYS has a total installed cost as low as $0.35 per watt with an industry leading installation rate of more than 10 modules per man-hour. ISYS is designed with innovative steel I beam components that have an outstanding strength to weight ratio.
“Large ground mount projects cannot reach the goal of grid parity with any existing installation methods or material available today; a different way of thinking is required.” said Douglas May, Unirac CEO. “The ISYS Ground Mount provides the most cost-effective utility and large commercial solution by lowering the total installed cost of projects, from foundation to module mounting hardware.”
ISYS components require zero field fabrication – no welding, drilling, or cutting at the installation site, making ISYS one of the fastest systems to install with consistent and repeatable installation steps. In addition, ISYS’ unique, smart design allows for pre-fabrication of sub-assemblies prior to delivery to project sites.
Engineered to accommodate every foundation option (driven pile, pre-cast concrete ballast, screw type earth auger, traditional excavation and concrete pier), ISYS adapts to the project site and enables customers to select the most cost-effective foundation system for their project site.
The I-beam components are manufactured by cold rolling, one of the most efficient manufacturing processes, which is significantly more affordable than aluminum ground mount systems. Mounting hardware is galvanized, which is also less expensive than stainless steel. All structural materials for the array come from a single source, specifically packed and designed to work with each customer’s module and site conditions.
Accompanied by a personalized Custom Solutions Division, a team devoted to supplying a complete suite of services, Unirac provides structural design services, on-site installer training, delivery logistics and field support to ensure accurate installation.
For the complete lineup of Unirac PV mounting solutions and services, visit the Unirac booth #9647 at Intersolar North America, in San Francisco, CA, from July 14 to 16, 2009.
A Pressing Need for Design and Engineering Standards
Renewable Energy World - March 7, 2011 - The solar industry has historically applied its technical resources, research dollars and time to increasing the efficiency, driving down the cost and improving the reliability of modules and inverters. The infrastructure that supports these solar modules, however, has largely been ignored probably because it does not generate any revenue for investors, businesses or homeowners.
Unirac’s 30% Share of the North American PV Rack Market
Greentech Media - February 28, 2011 - As module prices drop, innovation in BoS and racking becomes even more important. Unirac has a 30 percent market share of the North American solar racking market. Although mounting systems are not the most exciting components in the solar industry, a 30 percent market share is still impressive.
Mounting systems: strategies and competitive landscapes
pv magazine - February 25, 2011 - Mounting equipment may not be the most high-profile PV component, but it is a critical piece where innovative designs can make a big difference to costs. In an interview, Unirac executives discuss their strategies for the North American and U.S. solar markets, and the competitive landscape of a sector that is getting crowded.
US President sets lofty clean energy goal
pv magazine - January 27, 2011 - While setting an ambitious clean energy goal appeals to solar company executives, many are no doubt wondering what specific plans will get the country there. And, specifically, how will the plans benefit the solar industry. Doug May, CEO of Unirac, a racking system manufacturer in New Mexico, said he was pleased to hear the President’s message, but the message hardly affects what he must do to ensure the company’s growth this year and next.
Solar Acquisition Paying Off for Powertool Giant Hilti
Reuters - January 24, 2011 - In taking over New Mexico solar parts manufacturer Unirac, tool powerhouse Hilti has become a sudden competitor in the clean energy economy.
- June 23, 2010
Unirac launches non-penetrating attachment for seamed metal roofs
Click here to read more... - June 8, 2010
Spire Corporation chooses Unirac and CLICKSYS to support 1.6MW solar project
Click here to read more... - June 1, 2010
Rosendin Electric, Inc. selects Unirac to support 1.15MW San Jose International Airport solar project
Click here to read more... - May 4, 2010
Hilti acquires U.S.-based solar company Unirac
Click here to read more... - April 7, 2010
Unirac announces manufacturing capability in Ontario, Canada
Click here to read more... - December 10, 2009
Unirac chosen by Gexpro Electrical Distribution for 949kW installation to power Chicago pumping station
Click here to read more... - October 26, 2009
Unirac launches new commercial roof mount solution
Click here to read more... - October 23, 2009
Anthony Borck to Head Unirac Inc.’s New Commercial and Utility Group
Click here to read more... - October 13, 2009
Unirac celebrates 10 years leading the PV racking industry
Click here to read more... - August 25, 2009
Unirac Announces enhancements to CLICKSYS Residential Line
Click here to read more... - July 14, 2009
Unirac Acquires APS (Arizona Public Service) Tracker Patent Portfolio License Rights
Click here to read more... - July 13, 2009
Unirac Launches New Utility/Commercial Ground Mount Solution
Click here to read more... - July 1, 2009
Unirac chosen by Chico Electric to contribute to 447 kW Butte Community College project
Click here to read more... - May 5, 2009
Unirac unveils CLICKSYS, the next generation in residential PV mounting technology
Click here to read more... - April 6, 2009
Unirac named winner of Managing Automation 2009 Progressive Manufacturing 100 Awards
Click here to read more... - January 22, 2009
Unirac Partners With ThinkSolar for 650kW Solar Array in California
Click here to read more...